EYE Lighting/Iwasaki HSS0460 PV Solar Light Soaking Simulation System Chamber

Description

EYE Lighting/Iwasaki HSS0460 PV Solar Light Soaking Simulation System Chamber
Comes with a manual and what you see in the pictures. If you don't see it, you probably wont get it.
Specifications are from EYE and may vary slightly due to upgrades, options, or revisions this unit may or may not have.
This was being used at TUV for solar panel TUV certification. It is guaranteed to work.
The 1st Serial Number Tag Reads:
Model Number:
HSS0460-H119
Serial Number:
H119
Date:
August, 2008
Type:
Steady-state, Light Soaking simulation system
The 2nd Serial Number Tag Reads:
Serial Number:
HSS0460-H119
Cooling Fans:
750 W x 2 pcs
Lamps:
460 W x 60 pcs
Date:
August, 2008
Power Requirements:
AC 208 V, 3 Phase, 60 Hz, 89 A, 30 kVA
Type:
Solar Simulation Chamber
Bulb Information:
Manufacturer:
EYE
Model Number:
MR40QDSH/BUHP-R180
Description:
Multi-Metal Lamp
CE Marked:
Yes
Approximate Dimensions:
79" D x 166" W x 96" H
Information from the Manufacturer:
Equivalent to 1 Sun
IEC Solar-CCA Soaking
Uniformity - 10%
Spectral Performance - Class B, 10%
Class A Temporal Performance
Average Lamp Time of 3000 hours
Specifications:
Dimensions:
PV Panel Chamber:
3400 mm W x 2000 mm D x 2415 mm H
PV Panel Support Trays:
640 mm W x 1220 mm D (8 pcs)
Solar Light Source:
Lamp:
EYE / Iwasaki proprietary solar arc tube reflectorized lamp; 400 W x 60 pcs.
Spectral Matching:
IEC-61646 Edition 2.0 class C
Avg. Irradiation Intensity:
1000 W/m
2
(nominal)
Itensity Power Control:
80% - 100% of full power (without spectral change)
Target Irradiation Area:
2.6 m x 1.3 m (sufficient for 4 typical thin-film PV modules)
Uniformity:
±15% (IEC-61646 Edition 2.0 class A)
Temporal Stability:
±2% (IEC-61646 Edition 2.0 class C)
Distance from Solar Lamp to Target Area:
1.2 m
Lamp Life:
Approximately 3,000 hours (output and spectrum qualification)
Hot Re-Strike Time for Solar Lamps:
Approximately 20 mins
Other:
PV Module Irradiated Surface Temperature:
60°C or less with cooling fans operational (assumes ambient temperature of approximately 24°C and assumes no airflow obstructions such as fully closed chamber light shades)
Roller Conveyor System:
The system is supplied with four (4) PV module trays. The four trays fit across the fully target irradiation area. The trays are designed for typical thin-film modules allow 60 cm wide panels to rest directly on the tray panel edge support rails. These trays provide an easy method of loading and positioning PV modules in the solar chamber. By supporting the modules above the tray, cooling air can flow above and below the panels.
System Power:
208 V, 60 Hz, 3 Phase; 30 kVA
Weight:
Solar Chamber:
700 kg
Power Cabinet:
500 kg
0.00 minimum for packaging, handling, and order processing. Shipping to be determined by destination.
Prior to shipment I will need to know the following information (filled out on a form that I will send you) for International Customers or Packages/Freight being Forwarded internationally. International customers may also be subject to a freight forwarder form if applicable.:
(1) Are you the end-user of this item?
(2) If you are not the ultimate end-user of the item, please state the ultimate end user's name.
(3) What is the ultimate country destination?
02/09/16